Setting up the Computer

You have built your computer and hopefully everything is working as it should but you don't have an operating system. Here is where this page of the wiki is helpful, this page will guide you through everything you need to do to get your computer ready for you use.

Here is what to expect when first turning on your computer

Initial Power On:

Connect monitor to GPU (not motherboard unless using integrated graphics) Connect keyboard and mouse Plug in power cable and flip PSU switch to "ON" Press the power button on case What to Expect:

Fans should spin up LEDs should light up You should hear a single beep (if speaker connected) BIOS/UEFI screen should appear If Nothing Happens:

Check all power connections Ensure PSU switch is on Verify front panel connectors are correct Try reseating RAM BIOS/UEFI Setup:

Enter BIOS (usually DEL or F2 during boot) Check if all components are detected Enable XMP/DOCP for RAM to run at advertised speeds Set boot priority to your installation media Save and exit